Unmanned Aerial Vehicles  
  [ HOME ]  
Transport Canada Regulations

The Canadian Aviation Regulations define all areas of flying including pilot and aircraft standards, and the rules everyone, including Commercial Operators, must follow. UAV's being relatively new are not yet fully defined and regulations surrounding their operation are still being written. The following is an excerpt from interim guidelines Transport Canada has released.

Unmanned Air Vehicle (UAV)

Personal Aviation, Special Flight Operations & Launch Safety


 Definition of Unmanned Air Vehicle (UAV)

Section 101.01 of the Canadian Aviation Regulations (CARs) states, "Unmanned Air Vehicle" means a power driven aircraft, other than a model aircraft, that is operated without a flight crew member on board.

Unmanned air vehicles have been given many names, but are most commonly referred to as unmanned aerial vehicles (UAV), unmanned air vehicles, remotely operated aircraft or remotely piloted vehicles. Unmanned air vehicles may take the form of airships, aeroplanes or rotorcraft. Basically, they could be considered to be any unmanned aircraft that performs a useful mission and can be remotely controlled or has autonomous flight capability.


 How unmanned air vehicles are different from model aircraft

"Model aircraft" means an aircraft, the total weight of which does not exceed 35 kg (77.2 pounds), that is mechanically driven or launched into flight for recreational purposes and that is not designed to carry persons or other living creatures. Although some micro unmanned air vehicles may weigh less than 35 kg, they are operated by research institutions and other organizations for non-recreational purposes.


 Uses for unmanned air vehicles

Unmanned air vehicles operate in diverse environments, in high risk roles, including but not limited to: atmospheric research (including weather and atmospheric gas sampling), scientific research, oceanographic research, geophysical research, mineral exploration, imaging spectrometry, telecommunications relay platforms, police surveillance, border patrol and reconnaissance, survey and inspection of remote power lines and pipelines, traffic and accident surveillance, emergency and disaster monitoring, cartography and mapping, search and rescue, agricultural spraying, aerial photography, promotion and advertising, weather reconnaissance, flight research, and fire fighting monitoring and management.


 Advantages of unmanned air vehicles

Unmanned air vehicles are not constrained by human limitations and requirements. They make it possible to gather information in dangerous environments without risk to flight crews. They can be much more cost effective than manned aircraft operations, although recurring costs to repair or replace those damaged during flight can be very high.


 How unmanned air vehicles are regulated

Section 602.41 of the CARs states, no person shall operate an unmanned air vehicle in flight except in accordance with a Special Flight Operation Certificate (SFOC). Section 623.65 outlines information that should be submitted when making an application for a SFOC. Be sure to make your request as early as possible and provide as much information as possible. You must be able to demonstrate the predictability and reliability of the unmanned air vehicle, essentially that it has the ability to perform in the desired environment. The requirement for a SFOC is intended to ensure the safety of the public and protection of other users of the airspace during the operation of the unmanned air vehicle.


 Unmanned Air Vehicles Operating Beyond Visual Range

More and more UAV operators are making applications for Special Flight Operations Certificates (SFOCs) where the UAV is to be operated beyond visual range.  Once the applicant demonstrates the ability to conduct a safe operation, the Minister shall issue the special flight operations certificate.  The SFOC process allows each application to be considered on it's own merits, and the operator must evaluate the risks associated with the proposed operation and provide satisfactory risk mitigation measures.

While the ultimate goal is to “normalize” UAV operations within civil airspace, the industry technology is not mature enough, and the regulatory structure is not in place, to support routine operations.  Detect, sense-and-avoid (DSA) capability is a key to routine UAV operations.  The goal of any detect, sense-and-avoid system is to perform those collision avoidance function s (Sic) normally provided by a pilot in a manned aircraft.  Therefore, a DSA system will have to detect the traffic in time to process the sensor information, determine if a conflict exists, and execute a manoeuver according to the right-of-way rules.  If pilot interaction with the system is required, transmission and decision time must also be included in the total time between initial detection and the point of minimum separation.  The DSA system will have to possess the capability to detect both participating and non-participating aircraft.

The probability of a UAV colliding with another aircraft must be comparable to that for manned aircraft (i.e. an equivalent level of safety).  Vigilance for the purpose of detecting potential collisions must not be relaxed for any aircraft in flight, regardless of the type of flight, type of aircraft or class of airspace in which the aircraft is operating.

The availability of reliable DSA technology is likely to be a significant number of years away.  Until that time arrives, UAV operators proposing to operate beyond visual range need to be aware that, depending on the mission and the operating environment, it may not be possible to find ways to safely integrate the operation with the manned aircraft.  Each SFOC application will, of course, continue to be assessed on an individual basis.


(Preceding all Sic)

Transport Canada is trying its best to regulate an activity that is now widely acccessible by thousands of individuals that have little or no flight training. Aerial Perspectives will only operate with properly certified and licensed Commercial Pilots, ensuring safety and conformity with regulations as required.